Car keys · Newmarket
Ignition Lock Repair
The car arrived with one worn-looking key and a story about a lost spare.
In plain words
Whether the key won't insert, won't turn, turns without engaging anything, or is stuck and refuses to come back out, each version of the symptom points toward a different part of the mechanism. A key that spins loosely usually means something has disconnected inside; a key that won't insert usually means the barrel or the key itself is the obstacle. Naming the exact behaviour on the phone lets the locksmith bring the right tools before ever touching the vehicle.
How the visit goesAfter a slushy week the key barely reaches accessory before it stalls, gritty and reluctant, where it used to move cleanly through every position. Warming the car up in the driveway hasn't changed how the barrel feels at all.
Ignition Lock Repair
How the visit goes
Checking the other locks on the same key
Before deciding how to repin or replace the ignition cylinder, the locksmith asks about the rest of the vehicle. Do the doors and the trunk share a key with the ignition, or does one of them already need a different one? Keeping that arrangement in mind before any pinning begins means the finished repair either preserves a single working key across the vehicle or explains clearly why one lock now sits apart from the rest of them.
Removing a broken key without losing more of it
A snapped key calls for patience rather than force. Hooked and spiral extractors reach into the barrel and draw the broken piece out along the same path it went in, rather than pushing it deeper or twisting it further. Once the fragment is clear, the cylinder is tested and examined for the wear that likely caused the break, and a freshly cut key replaces the two broken halves before the vehicle is handed back to its owner.
A record worth keeping
Whether the vehicle is yours long-term or recently purchased, a plain account of what was done to the ignition is worth holding onto: which parts were replaced, how many keys were cut, and whether the doors were brought onto the same key. It is a useful line in the vehicle's history file, and a straightforward thing to hand to an insurer, a future buyer or a mechanic who asks about it later.
Ignition Lock Repair
In the van
Ignition lock cylinder
Pick and tension tools
Key code reader
Keyed-alike pinning kit
Key blanks and cutting machine
Ignition Lock Repair
What affects the quote
Vehicle make, model and column design
How the ignition assembly is built varies by vehicle, a simple housing reached with a few steps, or a column locked down with shear bolts and trim that has to come off carefully. That difference in access shapes how much time the repair takes.
Keying other locks to match
Bringing the doors and trunk onto a newly pinned ignition key, so one key runs the whole vehicle again, is separate work from the ignition repair itself, even when it happens during the same visit.
Access through the steering column
Reaching some ignition cylinders means removing trim, shrouding or fasteners around the column first, and putting all of it back cleanly afterward. A column that is straightforward to open takes less time than one that is not.
What to have ready
- Does the key insert, turn partway, or not turn at all?
- Do you have a spare or second key available?
- What is the vehicle's year, make and model?
Ignition Lock Repair: questions
QuestionsWhat if the key won't go into the slot at all?
That points toward the barrel itself, debris packed into the keyway, or a key that has bent or worn out of shape rather than a deeper electronic problem. The keyway is checked and cleared first, the key is compared against a spare if one exists, and the barrel is serviced or replaced depending on what that first check turns up.
How do you tell the cylinder apart from the switch behind it?
The cylinder is the part the key physically touches and turns; the switch is the electrical component behind it that responds to each position. The locksmith checks whether the barrel itself moves cleanly through every stop and whether the dash and starter respond at the right moments. When the barrel turns properly but the response is missing, the switch or wiring is a likely cause, though the battery, starter and park/neutral circuit are checked too before settling on it.
Can a key that snapped off inside the ignition be removed without damaging anything?
In most cases, yes. Hooked and spiral extraction tools reach in and draw the broken piece out along the path it entered, rather than pushing it further in. Once it is clear, the cylinder is checked for the wear that likely caused the break in the first place, and a fresh key is cut to replace both broken pieces before the vehicle is handed back to you.
Related services
- Car Key ReplacementThe car is yours now, but somebody else still holds a key to it.
- Spare Car Key DuplicationA teenager just passed a driving test and reasonably wants a key of their own rather than negotiating over the family's single copy every time the car is needed.
- Key Fob ProgrammingA new driver has joined the household, and the one existing fob is the only key anyone has ever had cut for this vehicle.